 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Power Top View LED 67-31A/SAC-AW1X2B9Z5/2T Features PLCC-3 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for automatic placement equipment. Suitable for reflow and wave solder processes. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment. Flat backlight for LCD's, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Material AlGaInP Emitted Color Reddish Orange Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 1 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Package Dimensions Note: The tolerances unless mentioned is 0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 2 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Absolute Maximum Ratings (TA=25) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating Unit V mA mA mW V 5 70 100 120 2000 -40 ~ +85 -40 ~ +90 Soldering Temperature Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electronic Optical Characteristics : Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Symbol Iv 21/2 P d VF IR Min. Typ. Max. Unit Condition mcd deg nm nm nm V A 1120 --------605.5 ----2.15 ----- ----120 611 ----18 --------- 2850 --------625.5 ----2.75 10 IF=50mA IF=50mA IF=50mA IF=50mA IF=50mA IF=50mA VR=5V Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 3 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Bin Range Of Dominant Wavelength Bin Code Min. Max. Unit Condition E1 E2 E3 E4 E5 605.5 609.5 613.5 617.5 621.5 609.5 613.5 617.5 621.5 625.5 nm IF=50mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition W1 W2 X1 X2 Group Bin 1120 1420 1800 2250 Min 1420 1800 2250 2850 Max mcd IF=50mA Bin Range Of Forward Voltage Unit Condition B9 2 3 4 2.15 2.35 2.55 2.35 2.55 2.75 V IF=50mA Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 4 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Typical Electro-Optical Characteristic Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 5 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 6 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel Note: Tolerances Unless Dimension 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 7 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA / 25 85/85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 8 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260 C Max 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 9 of 10 Prepared by: Ya_Hui Fang EVERLIGHT ELECTRONICS CO.,LTD. 67-31A/SAC-AW1X2B9Z5/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:23-Aug-2006 Rev. 1 Page: 10 of 10 Prepared by: Ya_Hui Fang |
Price & Availability of 67-31A-SAC-AW1X2B9Z5-2T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |